Simple Ways to Boost Wi-Fi Signal in your Office

There can be many factors, which may lead to poor Wi-Fi signal in your office. The location of your router, its firmware, the strength of the antenna, etc., can come into play to determine the speed of your Wi-Fi network. However, you can deal with these concerns by following some easy tips. Shared below are some simple ways to boost the Wi-Fi signal in your office.

Keep the Router in a Good Place

You cannot keep your Wi-Fi router in any place you like. Keeping it close to metal objects can significantly disrupt the Wi-Fi signal and make your network slow. Not only that, many other materials like glass, plastics, foam, wood, and cardboard can also disrupt the Wi-Fi signal. However, their effect on the network is not that severe as that seen with metal obstructions.

Appliances that send out electromagnetic waves can also interrupt the Wi-Fi signal negatively, so you should make sure to keep the router away from them. Almost all kinds of household appliances give off electromagnetic waves to some extent, including circuit breakers, fluorescent light bulbs, and even electric razors. However, it is seen that microwave ovens, stoves, washing machines, and dishwashers affect the Wi-Fi signal most severely. Even cordless phones, televisions, and radiant heaters can break off the Wi-Fi signal.

Update the Router Firmware

You should always keep your Wi-Fi router updated with the latest firmware updates released by the manufacturer. These updates will not only ensure that your Wi-Fi router works well, but also address the bugs and glitches that could affect signal transmission. Besides, keeping the Wi-Fi router updated will also thwart malware attacks, which could otherwise steal bandwidth and lead to data loss as well.

You can follow the below steps to check that your Wi-Fi router is running on the latest firmware available.

  • Open a web browser on your PC and connect to the Wi-Fi network.
  • Enter the IP address of the Wi-Fi router as mentioned on the back of the device.
  • Log in to the admin panel using the username and password provided at the bottom of the Wi-Fi router
  • Find and select the Firmware Update or Router Update option. This will install the latest firmware on your Wi-Fi router.
  • Wait for the process to complete and reboot the Wi-Fi router when done.

Note that most Wi-Fi routers these days come with small and low-power antennas, which may offer up to 4 dB gain only. If the Wi-Fi network in your office is very slow, then you can invest in a powerful Wi-Fi antenna that would offer up to 10 dB gain. This will allow you to boost the Wi-Fi signal in your office without having to change the router or switch networks.