Poor Mobile Signal – Solutions

Weak Mobile Signal

Wireless technology is still relatively new, and it keeps getting better with every passing generation. The wireless networks today offer amazing speed and connectivity that as seen better internet access and few dropped calls. But as the user base keeps expanding, this evolving technology should provide ways for meeting the needs of the user.

As while much of what has been said above stands as a fact, there still is much left to be desired in the distribution and accessibility of the wireless networks. Places such as densely populated urban areas, huge building, or basements tend to have poor connectivity. With this technology, things seem to worsen with every obstacle the wireless network hits or if the distance between one tower to the next is significant resulting in a weak relay of signals between the two. However, there is more to the underlying cause of such problems that what has been mentioned.

Causes Of Weak To No Mobile Phone Reception

The mobile signal distortion or deterioration can be attributed to any of the following:

  • General Interference

Our urban settings tend to play a major role in the network disruptions that people face today. The mobile signals will fail, deteriorate, or get distorted when they hit surfaces such as metals, concrete or glass. Such materials are widespread in modern towns and cities in the UK. As a result, the network signals will get weaker and weaker as the bounce of such surface or when they get absorbed.

  • Weather

The issue of weather is resolved a bit more and more as technology advances; however, wireless networks still can get messed up by the weather. The networks emit Electromagnetic VHF waves, and these are affected by the weather. The experts call the issue a Propagation Delay effect. In short, the network towers transmit signals that are reflected and refracted by different surface into various directions before they eventually reach the mobile phones.

As a result, the mobile reception is weak, and thus the user will experience dropped calls and slow internet speeds.

  • Congestion

The mobile user spends significant time online, and the number of people accessing the internet using mobile devices grows considerably with every passing year. It is a state of affairs pegged on the fact that network technologies have become better and faster and smartphones are the in thing. Internet access takes up much of the network bandwidth; as such, it could be that the problems you have with the signal or speeds may be due to too many users on the same network.

  • Cross Signals

The modern residential and commercial buildings have an array of wireless connectivity that includes Wi-Fi, Bluetooth, and NFC. As such, the presence of different wireless signals can lead to the deterioration or distortion that you are experiencing with your cell phone reception. The problem is that the signals are constantly crossing and fighting each other for airspace. If you factor that, together with the many elements in the urban setting that cause network degradation, things get complicated. That is why a decent mobile signal inside a busy establishment such as a shopping centre or a tall building is hard to get.

Possible Workarounds To Boost Signals

In as much as we agree that technology has advanced, it is prudent to state that no universal solution to this issue exists; but we are optimistic it will happen soon. Things are however not utterly bleak; there are ways to minimise the problem. You, nonetheless, need to be near a network tower or in an area where radio waves can pass without obstructions. If that is not the case, then the solutions offered below will not help.

1. Switch To A Carrier That Supports VoLTE

If the carrier supports VoLTE (Voice over Long Term Evolution), then they can provide direct HD voice integration into the call stream. It will reduce the need for a special device and will eliminate the background noise during the call. With such a support, even the seemingly weak signal can support a call without dropping the call. Moreover, the data over HD voice is compressed so that the audio uses less data allowing it to work with lower or weak frequencies or bandwidth.

2. Use A Signal Booster 

If the first suggestion does not work, then you most likely are not receiving cell signals. You can opt to install a signal booster in your building.The device is designed to amplify the available network frequencies. It works like a repeater, but it rebroadcasts the signals it finds within the vicinity. Prices of signal boosters vary. The price depends on the model and how strong it is in amplifying the signals. You can find a full range of mobile phone signal boosters from Mobile Repeater UK. However, you should note the following before getting the device:

  • Make sure the indoor or outdoor mobile reception is weak. You should know this because some of the boosters have specifications for indoor and outdoor use; as such, the performance may vary. You may pick a unit that works best outdoor and used it indoors thus it will not deliver as expected.
  • Know the distance in which you need to booster to amply because these devices do not have the same range. For instance, those meant for private use tend to have a short range compared to those for commercial use.

With a signal booster, it is possible to solve much of the trouble you have with the wireless network and have no dropped calls and enjoy reliable internet access and speeds.

3. Use Wi-Fi Calling Whenever Feasible

The networks today have fast and strong frequencies that can even support voice and video calling over the internet. Moreover, the security is better; you can make encrypted calls over Wi-Fi keeping your conversations private. The carriers advise their customers to use Wi-Fi calling mostly because it slashes the load on pre-existing wireless networks that have a significant volume of customers thus are overburdened.

4. Get Rid Of The Clutter

The network signals have to overcome various obstacles to reach your mobile phone. Various things in the outdoor are in play in the problems you have with your wireless network, so why add to it all by having stuff in the house that blocks off or distorts the signals! Therefore, you should assess your indoor space and see what items you need to get rid of and drastically improve the network reception in your house. A clutter-free space will see you enjoy crisp, clear, network coverage. Getting organised can be done at no extra cost, and it may be all you had to do to solve the problems you have with your wireless network. Therefore, you may want to try this option before considering the others.

The Verdict

When all is said and done, finding a lasting solution to the problem is a matter of doing research and hoping that technology advancements will avail something long-term. The networks are continually evolving, getting better and faster over the years and thus we should expect to see new creations that can support long distance transmissions. And while that is the hope for the future, the above offer temporary fixes to the current poor wireless network issues.

Mobile Repeater UK