Antennas are an important part of cell signal boosters. A signal booster has an internal/interior antenna and an external/exterior antenna. The external antenna has the responsibility of capturing the signals from outside areas, whereas the internal antenna is used for transmitting the amplified signals to the areas required.
You have to be careful when installing your antennas, as it can have a great impact on the performance of a cell phone booster. People tend to make a lot of mistakes when installing antennas which can reduce the performance of a booster significantly. Hence, through this article, we list the common mistakes that you may make when installing the antennas. This will help you to avoid them so that it will be possible for you to get maximum performance from your boosters.
Not Installing The External Antennas On The Roof
The ideal location for installing an external antenna is your roof, as it will facilitate the reception of cell signals without any interruption. Installing this antenna on your roof can help to get better performance. But if the roof is inaccessible for you, then try to install it on the window.
Choosing A Random Location For External Antenna
Most people select a random location for installing the external antenna. But this is not the right practice. You have to install the external antenna in a spot that has maximum signal strength. Therefore, it is important to find a location that receives maximum signals from your carrier for installing the exterior antenna of your cell signal booster.
You can find the signal strength in different areas using your mobile phone. Set it in the field test mode for getting the readings in numerical values rather than just bars. You may also use some mobile applications designed for measuring signal strength.
Not Pointing Your Uni-Directional Antenna In The Right Direction
There are two types of exterior antennas available. The first is the omni-directional antenna that has the capability to receive signals from all directions. The other type, which is known as the uni-directional antenna can receive signals from only one direction. So you have to point this antenna in the direction of the cell tower of your service provider.
Not Considering Antenna Separation
There should be enough distance to separate your interior and exterior antennas. Otherwise, it can result in the signals from the interior antenna reaching the exterior antenna creating a condition called oscillation. It can cause a reduction in the performance of your cell signal booster and might cause it to shut down.
People make many mistakes when installing the antennas of signal boosters. Make sure that you do not make them while installing your cell phone boosters.